Desktop Metal Debuts Studio System 2

Metal printing system opens up way for designers and engineers to print high-performance metal parts in the office, company says.

Desktop Metal’s new Studio System 2 enables high-quality metal parts production in an office environment with a simplified two-step solution that eliminates the need for a solvent debind phase, the company explains. The simplified, office-friendly metal 3D printing technology offers a means to print metal parts in low volumes for pre-production and end-use applications.

“As additive manufacturing adoption advances worldwide, Desktop Metal continues to drive innovations that enable the technology to more effectively compete with conventional manufacturing processes,” says Ric Fulop, CEO and co-founder of Desktop Metal. “Our next-generation Studio System 2 takes the best features of the original Studio System+ and significantly improves upon them, delivering higher quality end-use metal parts through a more streamlined and accessible process, and within an even smaller footprint.”

Enhancements include new print profiles and an all-new material system designed to deliver part quality, accuracy and surface finish while minimizing printing trial and error across a wider range of complex geometries. Desktop Metal’s Fabricate software workflow fully automates part creation through printing and sintering to produce high-quality, end-use parts with densities and feature accuracy similar to casting.

Next-generation metal 3D printing

The new Studio System 2 retains all the critical features of the original Studio System, while delivering advancements that make metal 3D metal printing even easier, the company says. Benefits include: 

  • 2-step process. Studio System 2 eliminates use of solvents with new material formulations that allow parts to be transferred directly from the printer into the furnace. The result is an accessible two-step process with a nearly hands-free experience that reduces consumables usage and overall system footprint.
  • Range of complex geometries. 
  • Enhanced surface finish. The Studio System 2 printer’s heated build chamber and new print profiles produce quality surface finish right out of the furnace across side walls and support-facing surfaces, company says. 
  • High-strength, triply periodic minimal surface (TPMS) infill. New isotropic TMPS infill creates strong parts for end-use applications. Vacuum sintering in the Desktop Metal furnace at temperatures of up to 1400°C produces parts and mechanical properties that are similar to castings and meet or exceed Metal Powder Industries Federation (MPIF) standards.
  • Broad portfolio of materials. The Studio System 2 is launching with 316L stainless steel. A broad portfolio of more materials that use the new streamlined, two-step process is in active R&D with new releases slated to rollout in 2021. In addition, the Studio System 2 will be backwards-compatible through the use of the debinder, with all materials previously supported by the Studio System, including 17-4PH stainless steel, 4140 low alloy steel, H13 tool steel, and Copper. 
  • Software controlled workflow. Desktop Metal’s Fabricate software features new, default print profiles tailored to the Studio System 2 process that simplify build preparation while still providing users access to more than 90 customizable print settings. Fabricate also generates Separable Support structures with strategic splits to avoid locking during post-processing and fully automates thermal debind and sintering cycles.

Worldwide shipments of the Studio System 2 are set to begin in the first quarter of 2021, with all existing Studio System customers eligible to upgrade.

“Based on the success of our original Studio System, we know companies around the globe are eager to adopt our new, more streamlined Studio System 2 process to produce difficult-to-machine parts featuring complex geometry like undercuts and internal channels,” says Fulop. “Across manufacturing, tooling, automotive, consumer products and electronics, and medical applications, companies are sharing how additive manufacturing is challenging their design and engineering teams to think differently about how to optimize designs for best-in-class part success.”

The Studio System 2, which is set to begin worldwide shipments in the first quarter of 2021, will also be available through an upgrade for all existing Studio System customers.

About the Author

DE Editors

DE’s editors contribute news and new product announcements to Digital Engineering 24/7 and the Robotics 24/7 sites.
Press releases may be sent to them via DE-Editors@digitaleng.news.

Follow Robotics 24/7 on Facebook


Email Sign Up

Get news, papers, media and research delivered
Stay up-to-date with news and resources you need to do your job. Research industry trends, compare companies and get market intelligence every week with Robotics 24/7. Subscribe to our robotics user email newsletter and we'll keep you informed and up-to-date.


Robot Technologies



Save the date for The Robotics Application Conference and Event on October 5, 2022 from Robotics 14/7
Robotics 24/7

The Robotics Applications Conference from Robotics 24/7.
Join us October 5 for the Robotics Applications Conference – a free one-day virtual event. Hear from experts with sessions on automation, goods-to-person, palletizing, picking, machine tending and more. Sign up today!